Plastic Pellet Retention System 70 µm | EU 2025/2365 Compliant | Winkler
Effective Prevention of Pellet Loss Under EU Regulation 2025/2365
Preventing microplastic emissions is no longer just a matter of responsibility for the plastics-processing industry – it's a legal requirement. Under EU Regulation 2025/2365, industrial operators must technically prevent plastic pellet loss via surface drainage. Our specialised retention system with a 70 µm micron rating offers the ideal solution.
Whether in loading zones, silo bays or yard drains close to production, our ready-to-install drain basket sets and replacement filters stop particles right where they occur. This legally secures your site and meets the strict technical requirements for audits such as Operation Clean Sweep (OCS).
Yard Bucket Pellet Retention System 70 µm – EU-Compliant | Winkler 149,00 € / exkl. MwSt.Point Drainage ProBypass-free: 70 µmEU 2025 / OCS Ready
Drain Basket B1 Pellet Filter 70 µm – Shallow Design | Winkler 177,00 € / exkl. MwSt.Low-rise specialist B1Bypass-free: 70 µmLegally Compliant: EU 2025
Drain Basket D1 Pellet Filter 70 µm – Shallow Compact Design | Winkler 164,00 € / exkl. MwSt.Compact Specialist D1Bypass-free: 70 µmEU 2025 / OCS Ready
Drain Basket C3 Pellet Filter 70 µm – Compact Solution | Winkler 188,00 € / exkl. MwSt.Precision Fit C3100% granule stopAudit-Proof: EU 2025
Drain Basket A4 Pellet Filter 70 µm – Deep Design | Winkler 196,00 € / exkl. MwSt.Maximum capacity A4Long downtimesCompliant with EU 2025 & OCS
Replacement Pellet Filter 70 µm – EU 2025/2365 | Winkler From 125,00 € / exkl. MwSt.EU 2025 Compliant70 µm granule stopCan be retrofitted individually
The Winkler Principle: Maximum Sealing without "Bypass"
In industrial filtration, a filter is only as good as its seal. Many standard solutions fail because granules slip between the edge of the bucket and the shaft wall – the so-called "bypass."
Our system relies on mechanical forced guidance:
- Integrated Collar: The dimensionally stable 70 µm fabric features a collar that is slipped flush over the rim of the slotted bucket.
- Industrial Drawstring: A reinforced drawstring securely fastens the filter to the bucket body.
- Zero-Bypass Guarantee: We deliberately forgo an emergency overflow. All incoming water is forcibly guided through the fine filter fabric, preventing any uncontrolled granules from entering the sewer system.
Perfect Fit for all Gully Grates according to DIN 4052
To ensure seamless granule retention across the entire factory premises, we offer our system for all common designs. Each set consists of a robust slotted bucket and the pre-assembled 70 µm high-performance filter.
Overview of available models:
- Model A4: For high street drains (Form A, Ø 450 mm). Special feature: Maximum capacity for high sediment loads.
- Model B1: For shallow street drains (Form B, Ø 450 mm). Special feature: Ideal for shallow installation depths.
- Model C3: For special gully grates (Form C, Ø 300 mm). Special feature: Compact solution for industrial drains.
- Model D1: For compact drains (Form D, Ø 300 mm). Special feature: Flat and narrow design.
- Yard Bucket: For yard and point drainage (Square / Small round). Special feature: Protection in production-related areas.
- Retrofit Filter: Suitable for all models listed above. Special feature: Universal fabric, individually and flexibly retrofittable.
Sustainability and Economic Efficiency through Retrofitting
At Winkler Filtertechnik, we focus on long-lasting solutions. If you already have stable slotted buckets according to DIN 4052, you don't need to replace them. Our 70 µm retrofit filter can be ordered individually and integrated into your existing stock with just a few simple steps. This saves costs and conserves resources, while simultaneously ensuring full conformity with the new EU legislation – a decisive advantage for sectors such as Energy & Environment, Chemistry & Raw Materials, and Civil Engineering & Landscaping.
Consultation from the Industrial Filtration Specialist
Identifying the correct bucket sizes for an extensive factory site can be complex. Especially in the areas of Traffic & Logistics, we are happy to assist you with planning. As experts in industrial and environmental filtration, we are happy to support you with planning. We help you equip your site in a legally compliant and environmentally friendly manner, so that you are well prepared for upcoming audits and environmental inspections. Use our Filter Technology Consultation or our specific Consultation for Industrial Filter Technology.
FAQ – Frequently asked questions about pellet retention
Here you will find answers to the most frequently asked questions.
The regulation obliges companies that handle plastic pellets to take technical measures to prevent microplastics from entering the environment. Our 70 µm retention systems are a recognized technical barrier to implement these legal requirements directly in the drainage infrastructure.
This depends on the design of your gully. Standard road gullies usually have a diameter of 450 mm (Model A4 or B1). More compact gullies in halls or narrow courtyards often use the 300 mm size (Model C3 or D1). We would be happy to advise you by telephone on how to correctly determine your stock.
The high-performance polymer we use has a very high open screen area, which allows for an excellent flow rate despite the fine mesh size. Regular cleaning of the bucket from leaves and sediments ensures that drainage performance is maintained even during heavy rainfall.
Yes, sustainability is important to us. You can order the 70 µm filters individually as retrofit or replacement filters. This way, you don't have to replace the entire set (bucket + filter) if the fabric is worn out after many years of intensive use.
OCS requires proof of technical containment measures at all potential escape routes. By installing our bypass-free filters, you demonstrate to auditors the highest degree of technical diligence in preventing pellet loss.
